Cup Splitter Fixed and Fitted
As I finished early today for Xmas I decided to spend the afternoon fixing the Cup Splitter that arrived yesterday then fit it to the 172.
As it arrived in 2 parts [a clean break from the previous owner] I decided to bond the 2 parts with fibreglass. I used a fibreglass repair kit from my local Halfords.
Once finished it gave a very strong bond and the crack was almost unnoticeable!
I then used self tapping screws to attach the splitter to the front bumper.
It might not last long though as it is very low to the ground.
Some pics.
As it arrived in 2 parts [a clean break from the previous owner] I decided to bond the 2 parts with fibreglass. I used a fibreglass repair kit from my local Halfords.
Once finished it gave a very strong bond and the crack was almost unnoticeable!
I then used self tapping screws to attach the splitter to the front bumper.
It might not last long though as it is very low to the ground.
Some pics.
posted by C Mac at 3:30 pm
0 Comments:
Post a Comment
<< Home